ECS M925 MoBo onboard graphics
I'm facing troubles with the onboard graphics, (I think)it starts a while later after putting on the computer. On the monitor it stars flashing like receiving electric jumps and right way monitor goes black showing "No signal". The question is: Is it a problem with only the onboard graphics chip or the problem goes to the very motherboard. Can I put a AGP graphic card and solve the situation?
Any help will be appreciated.
Any help will be appreciated.
Computers & Internet - PC Chips - (M925G) Motherboard
Answers & Comments
Well it all depends on if the onboard is fried. Usually, that's a sign of overheating. I'd toss in a case fan. Maybe try running the system with the side of the case off of it. If it still does this try putting a fan beside it to give it a massive rush of airflow. If it stables out, then it's a heat issue.
You can put an AGP card into that motherboard, which is always beneficial to the performance since the processor and RAM isn't being used by the video. However, you'll need to disable the onboard video system in the BIOS before you can really use an AGP card to it's ability.
I hope this helps bud.