ELEMENT KEEPS BLOWING
I have a De Dietrich fan oven and have replaced the element as the over wasn't getting hot. However when I plugged it back in it keeps blowing...maybe not wired properly. can you tell me what the wire configuration at the back should be ...a photo or diagram would be great
Ovens - De Dietrich
Answers & Comments
The heater element should have 2 terminals , it does not matter which wire you put on the terminals, as they are both common,
If there is a third terminal, then that will be the earth terminal, which is usally located on the base of the element fixing bracket. so do not get the wires mixed up, because if you are putting the earth wire on the wrong terminal, it will blow.
Hope this helps you sort it out.