Engine turns over but will not start. Engine was running good stop to jumb a friend off with booster cables. My engine died and I can't start it it. HHEELLPP
Ok next time you jump start some body, the right way to do it, is pluging the jumper wires, start you car for a few minutes to charge the other car batterie, and the shut your car off, and tell the other driver to start his car, this is only an advise for next time, and regarding the not start on you car. make sure to check all the fuses, including any fuses closed to the batterie if present, and also ask some one to help you check for spark at spark plugs, if you do have spark let me know and i will guide you from there, but before any thing let me know exactly what the car does or does not do, like it crANKS BUT WONT START? or does not crank or turn at all? thank you. i,m not here very often but i will try to.
Go to your fuse panel you probaly snapped a fuse look for a fuse labeled ignition (ign) or ecm if ok check the rest of your fuses with a test light both sides of fuse top has a little area for probe testing fuse if both sides dont light the light pull to check if snapped replace
Answers & Comments
Ok next time you jump start some body, the right way to do it, is pluging the jumper wires, start you car for a few minutes to charge the other car batterie, and the shut your car off, and tell the other driver to start his car, this is only an advise for next time, and regarding the not start on you car.
make sure to check all the fuses, including any fuses closed to the batterie if present,
and also ask some one to help you check for spark at spark plugs, if you do have spark let me know and i will guide you from there, but before any thing let me know exactly what the car does or does not do, like it crANKS BUT WONT START? or does not crank or turn at all?
thank you.
i,m not here very often but i will try to.
Go to your fuse panel you probaly snapped a fuse look for a fuse labeled ignition (ign) or ecm if ok check the rest of your fuses with a test light both sides of fuse top has a little area for probe testing fuse if both sides dont light the light pull to check if snapped replace