Er09 and Er07 black screened
I have a Sagem DVR 6200T, it shows Er07 & Er09, does not do anything, have turn it off for a while and restarted it but still does the same, hope you can help me please
steve
Televison & Video - Sagem - PVR 6280 Freeview DTV Receiver / 40-Hours Video Recorder
Answers & Comments
Turn off the unit for 15 mins.
Turn back on with eveything connected except the antenna.
You will get an er 09 on the display.
Press OK on the remote.
With a bit of luck the box will reboot into standby.
Connect antenna and see how you get on.
did not get 09 but the unit went to "init" display then when airial conected it powered up ok even all recordings ok. geat advise i was even lookig for a replacement recorder .but now all working thanks again.
Solved this problem by buying a new adaptor, but dont phone Sagem cos they only take credit cards, will not take debit cards, they wont even take a cheque, I dont have a credit card only debit !! and they are very unhelpful. I used a 12v adaptor and it is working perfectly now.