First try entering into SP mode by pressing: Clear button>1 0 7> and press and hold the Stop button for 3 secs. Then switch off and on the copier. If SC 541 code is still there, check the following in the fuser unit: Fusing thermistors defective or out of position Thermostats open circuit Power supply board defective Loose connectors of Fuser unit. Good luck and please rate me, thanks.
I have the photocopier name Mp 1600l and this machine is unable to load tonner stil tonner is in so what can i do please help me
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
First try entering into SP mode by pressing:
- Fusing thermistors defective or out of position
- Thermostats open circuit
- Power supply board defective
- Loose connectors of Fuser unit.
Good luck and please rate me, thanks.
Clear button>1 0 7> and press and hold the Stop button for 3 secs. Then switch off and on the copier.
If SC 541 code is still there, check the following in the fuser unit:
I have the photocopier name Mp 1600l and this machine is unable to load tonner stil tonner is in so what can i do please help me