Hi Sharlene- I found this link. https://www.cmyuk.com/hardware/cutters/esko/pdfs/Esko-Kongsberg-X-Tooling-Guide.pdf On page 33, it talks about using the "V-notch Knife 45 degrees". Hope this helps.
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Hi Sharlene-
I found this link.
https://www.cmyuk.com/hardware/cutters/esko/pdfs/Esko-Kongsberg-X-Tooling-Guide.pdf
On page 33, it talks about using the "V-notch Knife 45 degrees".
Hope this helps.