Farberware FCP512S coffee pot instructions
Have lost the manual and have set the time, but have to keep pushing program and set buttons umpteen times before I can make the hour for brewing start flashing so that I can program the pot to begin brewing at a future time. By the time I do so, I can't remember how it happened. Could you tell me how to do so? Thanks for your help
Coffee Makers & Espresso... - Mr. Coffee - ISX23
Answers & Comments
How to set the time:
Plug the unit in
Wait until the hour on the LCD starts blinking
Press the CLOCK button to set the correct hour
Press the SET button to switch to minutes
Press the CLOCK button to set minutes
Press the SET button to accept the time
***there is no AM icon, only PM***
How to program delay brewing:
Press and hold SET until the hour begins to blink
Press PROGRAM until you see the tiny bell icon on the bottom of the screen
Press CLOCK until you get to the hour you want to start brewing
Press SET to switch to minutes
Press CLOCK to get to the minutes you want to start brewing
Press SET to finalize
Press PROGRAM to activate. When the little bell is flashing, the coffee pot is set to go on at the desired time. While the coffee pot is on or in warming mode, there are vertical lines on the top of the LCD screen that shows you it is on. If you press the ON/OFF button, you can turn it off before the two hour keep warm cycle is complete.
Hope this helps