Hello, unplug the washer and take the control panel out to access the water level switch again. Remove the pressure tube that goes to the tub. Then see if it still does the same thing, if when you remove the tube the washer will fill, that tube is partially clogged causing pressure to be trapped in the tube, clean it out. Note that if it start to fill unplug the washer because it will overflow with that tube pulled off. Thanks
Answers & Comments
Hello, unplug the washer and take the control panel out to access the water level switch again. Remove the pressure tube that goes to the tub. Then see if it still does the same thing, if when you remove the tube the washer will fill, that tube is partially clogged causing pressure to be trapped in the tube, clean it out. Note that if it start to fill unplug the washer because it will overflow with that tube pulled off.
Thanks