Flapper valve I installed a new 1.6 GPF toilet yesterday. ( TK Patriot Space Saver 6001058 Part number 141215096.) When flushing, the flapper valve closes too quickly not letting enough water out of the tank to do an adequate flush. I have not changed the lenght of the flapper valve lift chain from where the factory had it set. It appears to have a little slack when flapper valve is closed. What do I do to keep this valve open longer?
You will need to adjust the chain. They are just clipped at any point when coming from the factory not at the opyimal length. It will take a little effort to find the desired length as sometimes the trick to getting the valve to remain open longer is opposite of what one would expect. I mean there is a point to where there will be more slack in the line than you might expect to get the valve to stay open for the optimal duration. Hope this helps you.
Answers & Comments
You will need to adjust the chain. They are just clipped at any point when coming from the factory not at the opyimal length. It will take a little effort to find the desired length as sometimes the trick to getting the valve to remain open longer is opposite of what one would expect. I mean there is a point to where there will be more slack in the line than you might expect to get the valve to stay open for the optimal duration.
Hope this helps you.