Foxguard jp2 immblsr on triumph stag will not de activate or go into service mode.Ignition switch operates as normal but dash lights stay off wipers and washers dont work
Wipers and washers working fine last night not working now.Engine turns over but will not start.Ignition switch working ok lights ok except brake lights and reversing lights.No lights on dash panel no power to ignition control fuse 3 in engine bay fuse box
Cars & Trucks - Triumph - Stag - 1977 Triumph Stag
Answers & Comments
Your half way there. All you need is a wiring diagram to trace the wire from the ignition to that fuse. Most likely it is one wire from the ignition, then it splices to the different fuses. In my experience the splice fails(corrosion), Some times you loose one area, some times all. Depends on which side of the splice is corroded the most. Splices are hard to find. Even harness diagrams can be as much as 2 feet off. I usually find the color code of the wire and run a new wire. In your case, it would be from the ignition switch to the fuse panel.