FR33E Hi, I have the FR33E motherboard and i just switched cases. I no longer have the manual, however all I am getting is the power to the board. I am not getting any video. Please Help!!!!! Thank u!!!
Make sure both power cables are hooked to the mobo. 24 and the 4 pin. if still no video check all the cables. is STILL no video what may have happened is that during the case switch you may have given the board a static shock thus shorting out the video chipset on the mobo. you may need to replace it.
Answers & Comments
Make sure both power cables are hooked to the mobo. 24 and the 4 pin.
if still no video check all the cables. is STILL no video what may have happened is that during the case switch you may have given the board a static shock thus shorting out the video chipset on the mobo. you may need to replace it.