Frigidaire Electric Dryer Model FEFB9200ES0. To enter diagnostics it says to put the selector knob at the 12 o'clock position. The knob rotates the complete 360. What position is 12 o'clock?
1. Non-Digital Readout Display Models: Position the cycle selector knob to the 12 O'clock position. -----------------Digital Readout Display Models Try this : -----------------1) Position the cycle selector knob to the Normal cycle option. 2. Press and hold the Select and Pause Cancel buttons simultaneously for six seconds. 3. Immediately after, press and hold the START and Pause Cancel buttons simultaneously for 4 seconds. The control will enter test mode, the buzzer will sound 3 times and all LED'S will rapidly flash. ---------------Try this.Check and reply.Thanks.Helpmech.
E9E is the voltage error in control panel board.Or its motor issue.------- Please click this link below for more help:---- You can get required parts from from online sites like: --- www.repairclinic.com or from searspartsdirect online site. --------- This should help.Thanks.Helpmech.
E9E is the voltage error in control panel board.Or its motor issue.------- Please click this link below for more help:---- http://technoanswers.blogspot.com/2011/04/frigidaire-electric-dryer-shows-e9e.html ----------
You can get required parts from from online sites like: --- www.repairclinic.com or from searspartsdirect online site. --------- This should help.Thanks.Helpmech.
12 O clock is 90 degree position, why do you want to put it in diagnostic mode? Is there any error code appearing. Please get back to me if you have any other questions.
Answers & Comments
1. Non-Digital Readout Display Models: Position the cycle selector knob to the 12 O'clock position. ----------------- Digital Readout Display Models Try this : ----------------- 1) Position the cycle selector knob to the Normal cycle option.
2. Press and hold the Select and Pause Cancel buttons simultaneously for six seconds.
3. Immediately after, press and hold the START and Pause Cancel buttons simultaneously for 4 seconds.
The control will enter test mode, the buzzer will sound 3 times and all LED'S will rapidly flash.
--------------- Try this.Check and reply.Thanks.Helpmech.
E9E is the voltage error in control panel board.Or its motor issue.-------
Please click this link below for more help:----
You can get
required parts from from online sites like:
--- www.repairclinic.com or from searspartsdirect online site. --------- This
should help.Thanks.Helpmech.
Hello & Welcome to FixYa
12 O clock is 90 degree position, why do you want to put it in diagnostic mode? Is there any error code appearing. Please get back to me if you have any other questions.
Kevin
sorry this is the picture
I mean the dial should remain at its normal position
Hi scottwn,
It means they need it on 0, or in this case the OFF position.
Here is also a nifty guide to the testing sequences:
http://manuals.frigidaire.com/prodinfo_pdf/Webster/134859700e.pdf
Hope you find this helpful. If you do, please accept the answer.