Galaxy DX66 - Jumping Frequencies
I have a Galaxy DX 66 - Its been my truck for around 6-7 years; running on CB Freq.s Just this winter it started jumping frequencies back and forth between 27.185 (Channel 19 on CB Freqs.) and 23.-24.350 around that area. I'm thinkin its just a loose solder, which i can fix, but i just don't know where it is. Where can i find a diagram
Radio Communications - Galaxy Radios - DX-66V Base CB Radio
Answers & Comments
Loose soldier joints on board from vibration of truck. take off top cover and look for any broke soldier joints across entire board.resoldier any that is broke. my 6600 mirage done the same thing.friend at local cb shop fixed mine that solved the problem
It needs an alignment. The VCO is out of whack.