Sometime it could just be of aging. I have a 130, it was having similar problems, until i realized it was the screen not showing, but power on turning on. In your case, I probably probably try a hard factory reset as follows:
To perform a master reset:
Turn off the device.
Press the PAGE, ENTER2, and POWER buttons simultaneously.
Release all buttons once the Do you really want to erase all user >Select Yes.
Answers & Comments
Hi Earl,
- Turn off the device.
- Press the PAGE, ENTER2, and POWER buttons simultaneously.
- Release all buttons once the Do you really want to erase all user >Select Yes.
hope this helps!
Sometime it could just be of aging. I have a 130, it was having similar problems, until i realized it was the screen not showing, but power on turning on. In your case, I probably probably try a hard factory reset as follows:
To perform a master reset:
Kevin