GE stove model GRSR3620SM-2 Self Cleaning Cycle Not Working
I have recently started having problems with the self cleaning cycle of this unit. The Oven Door Lock switch is working properly along with all visual indicator lamps and thermal locks but only the lower element turns on. I then thought the problem might be the upper element and therefore tried the broil cycle and noticed that the upper element was only getting half the voltage to that of lower element, (115V verses 230 volts). I would assume that both elements would run off of the same voltage? All fuses are also fine. Any ideas? Thanks
Ovens - GE - Profile JTP18 Electric Single Oven
Answers & Comments
My first thought would be a loose connection at the element or main power terminal. it could be a relay board issue also