Gem Sound clipping problem
I have a dj setup with Gem Sound amp EXA-3950 (3000 watts-1400 watts max peak per) with 2 Gem Sound TR-300's ( dual 15" woofers- one horn and 5 tweeters on each speaker --1000 watts peak?). we seem to have clipping problems quite frequently as we near 50% amp capacity--particularly in large gyms for school dances. the mixer we use is a Behringer 2 channel mixer with the gain about half way up. any assistance would be greatly appreciated. thanks!
Audio Players & Recorders - Gem Sound - GemSound PA-585 2-Channel Amplifier
Answers & Comments
First of all the EXA-3940 is rated at 350watts per channel in to 8 ohms. The 1400 watts is bridged into a 4 ohm load. Second, the speakers can handle 1000Wats peak with an average of 600 continuous (i'm guessing). That tells me that the amp is underpowered for the speakers. The sensitivity of the amp is such that the mixer is overdriving the input stage. That is what is causing the clipping. If you are looking for more volume, you are probably better off purchasing another amp and running them in bridge mode, 1 per speaker cab. Be careful though, not to overdrive the speaker cabinets either.
Dan