An E2 Code indicates the drive motor is stuck in position IE: the main piston/sealpack is jammed. The piston is probably bent in the sealpack. This needs to be replaced. Try unplugging the unit for several minutes and plug it back in to see if it will reset. If not bypass the softener until it can be repaired. RJ
Answers & Comments
An E2 Code indicates the drive motor is stuck in position IE: the main piston/sealpack is jammed. The piston is probably bent in the sealpack. This needs to be replaced. Try unplugging the unit for several minutes and plug it back in to see if it will reset. If not bypass the softener until it can be repaired.
RJ