Got and old army 2.5 ton am gen 1972 model truck that lost power and died we can run a hot wire to diesel pump and short it across on start it will run it has none of the ectrical gages on the dish that work etheir
Just find, with a test light, which wire is hot with the switch on, and that's the one to connect to the solenoid on the fuel pump. When switch is turned off, engine will shut down. Now you just need to put power to the gages when switch is on using the same idea.
Answers & Comments
Just find, with a test light, which wire is hot with the switch on, and that's the one to connect to the solenoid on the fuel pump. When switch is turned off, engine will shut down. Now you just need to put power to the gages when switch is on using the same idea.