Any ideas what to do with this one? "Pressure Tube Fault" it says--I've checked all the tubes I can see under the machine and behind the console (although...which one is the pressure tube?) and nothing seems to be "blocked, crushed or fallen off".

The reason I ran the diagnostic is because when the machine went to drain, the pump would run for about 10 seconds, then shut off. A 'hot burn' smell would occur...never a good thing, I'm guessing! The same thing happens when I run the "drain pump test", so I'm guessing...a pump problem (but how does that correspond with a 'pressure tube fault'?)

I've taken off the pump to check for any junk blockages in the tubes...nada. Thus...I'm hitting my (admittedly short) wall of knowledge.

Any ideas out there for me before I spring for a repair job? If a new part is needed, might it be something I can install myself?

I'm sorry if this has been answered elsewhere on this site...I've looked through the forum and can't find mention of this code.

Washing Machines - Fisher and Paykel - GWL11 Top Load Washer