For this unit, you want to start by removing the hand vac portion. along the side of the clear chamber towards the nozzle opening is 2 clips on either side of the unit. Squeeze these clips together and the clear plastic chamber should come off. Pull the filter out of the chamber and dump out.
At this point too, you can choose to clean the dust cup, (soap and water) and the cloth filter in there (again soap and water). However if you do that, please make sure that the filter is 100% dry before putting it back into the unit.
Answers & Comments
For this unit, you want to start by removing the hand vac portion.
along the side of the clear chamber towards the nozzle opening is 2 clips on either side of the unit.
Squeeze these clips together and the clear plastic chamber should come off. Pull the filter out of the chamber and dump out.
At this point too, you can choose to clean the dust cup, (soap and water) and the cloth filter in there (again soap and water). However if you do that, please make sure that the filter is 100% dry before putting it back into the unit.
Good luck,
Mark