The handle release that you step on, to release the handle is jammed. Can you direct me how to fix this, nothing in the manual addresses this, thank you.
Thanks, can I ask how to remove the top casing, and do I need a New Pedal/Part?Thanks, can I ask how to remove the top casing, and do I need a New Pedal/Part?
i would suggest taking bottom plate off remove brushroll. then check and see if there are any screws that may be holding casing on, or if there are just retainer snaps. either way once you have figured that out simply work the casing off. I've never worked on this machine so here is a link to a manual hope it helps.http://www.retrevo.com/d/df/document.pdf...i would suggest taking bottom plate off remove brushroll. then check and see if there are any screws that may be holding casing on, or if there are just retainer snaps. either way once you have figured that out simply work the casing off. I've never worked on this machine so here is a link to a manual hope it helps. http://www.retrevo.com/d/df/document.pdf?doc=79722c9e8d31b52e391f2e4f34e53104&ts=1357686634142&rk=0.9055451332354507
Answers & Comments
Its as simple as pulling top casing of bottom part of vac off and replacing the pedal just pay attention to where the springs go as you take them out
Thanks, can I ask how to remove the top casing, and do I need a New Pedal/Part?
i would suggest taking bottom plate off remove brushroll. then check and see if there are any screws that may be holding casing on, or if there are just retainer snaps. either way once you have figured that out simply work the casing off. I've never worked on this machine so here is a link to a manual hope it helps.http://www.retrevo.com/d/df/document.pdf...