Hardware problem - not booting into windows
I've been using the laptop without any problems untill i encountered the folowing ERROR: [email protected]#$
************************************************
Error 0701: USB Over Current On HC/Port - Bus:00H Dev :1DH Fun:01H / Port:00H
Error 0701: USB Over Current On HC/Port - Bus:00H Dev :1DH Fun:02H / Port:00H
Press F1 For Setup, Press F12 For Boot Device Selection Menu
**********************************************
Well, F1 takes me into the Bios, all looks well. And F12 Does nothing. how ever i tried to boot from CD-drive but of no use, i tried to solve it million methods but invain i couldn't if any one has a solution for this please provide i'll be very thankfull
thanks in advance
srini
usb over current
************************************************
Error 0701: USB Over Current On HC/Port - Bus:00H Dev :1DH Fun:01H / Port:00H
Error 0701: USB Over Current On HC/Port - Bus:00H Dev :1DH Fun:02H / Port:00H
Press F1 For Setup, Press F12 For Boot Device Selection Menu
**********************************************
Well, F1 takes me into the Bios, all looks well. And F12 Does nothing. how ever i tried to boot from CD-drive but of no use, i tried to solve it million methods but invain i couldn't if any one has a solution for this please provide i'll be very thankfull
thanks in advance
srini
usb over current
Computers & Internet - Lenovo - 3000 - 3000 N100 0768 - Pentium Dual Core T2060 1.6 GHz - 15.4in....
Answers & Comments
One of your usb ports is either damaged or has an object stuck in it causing a short. Unplug all usb devices and look at each port. Note if one looks slightly different from the others. There is a plastic tab that fits into usb plugs. If this tab is bent and touches the side of the port, it can cause the short. If this is the case you may be able to either clean out or bend back the bent tab.