An error is detected by the control board and locked the controls to prevent the operation of the washer unless the problem is addressed. Unplug the washer for 5 minutes then plug it it back. Turn on the washer then press any button and wait for 5 seconds. Press and hold the Start/Pause and Cancel buttons simultaneously. As long as the buttons are held, the failure code will appear in the display as an “E” followed by two numbers, a number and a letter or two letters. The control will beep and the Door Lock, Wash, Rinse, and Final Spin indicator lights will flash.
Indicate the error code, if there's any, for further troubleshooting and repair advice. It will help the speedy disposition of the problem if the exact model number of the washer is included in the information provided and to make sure we are troubleshooting the right machine. You don't have to accept or reject and rate this post to add information or post your comments and follow-up questions.
Answers & Comments
An error is detected by the control board and locked the controls to prevent the operation of the washer unless the problem is addressed. Unplug the washer for 5 minutes then plug it it back. Turn on the washer then press any button and wait for 5 seconds. Press and hold the Start/Pause and Cancel buttons simultaneously. As long as the buttons are held, the failure code will appear in the display as an “E” followed by two numbers, a number and a letter or two letters. The control will beep and the Door Lock, Wash, Rinse, and Final Spin indicator lights will flash.
Indicate the error code, if there's any, for further troubleshooting and repair advice. It will help the speedy disposition of the problem if the exact model number of the washer is included in the information provided and to make sure we are troubleshooting the right machine. You don't have to accept or reject and rate this post to add information or post your comments and follow-up questions.