Hi,C8 is a Cycle. 13 is the Error Code. As per Rheem 13 is listed as Oxygen Depletion Sensor Problem. The unit needs some dis-assembly and cleaning (or replacing) the oxygen sensor.Let me know,if needed further assistance.Hope i helped you.Thanks for using ' Fixya ' and have a nice day!!
Thanks for your response!!The Error that i Explained that was Directly explained by Rheem in their Documentation. I Wish i had a Better Answer.\Here are the possible causes:1 Air intake of the unit and/or vent termination may be blocked.A Remove any obstructions of the air intake or vent termination2 Ventilator or other vents of the room may be blocked.A Clean the air intake of any dust or grease buildup.3 The air inside the room may be contaminated due to long use of a fireplace or spaceheater.A Open a window or vent to keep the air inside the room fresh.4 Heavy ventilation by other equipment or appliances causing the lack of air intake to thewater heater.A Lower the level of the ventilation of other equipment or appliances.5 Air shortage may be caused by too much steam in the unit.A Avoid direct contact from steam.6 Air intake filter is clogged.7.A Clean the air intake filter.http://globalimageserver.com/fetchDocume...Read Page 33 For Error Detail.That's the best i could Offer. Let me know,if needed further assistance.Hope i helped you.Thanks for using ' Fixya ' and have a nice day!! Thanks for your response!!The Error that i Explained that was Directly explained by Rheem in their Documentation. I Wish i had a Better Answer.\Here are the possible causes:1 Air intake of the unit and/or vent termination may be blocked.A Remove any obstructions of the air intake or vent termination2 Ventilator or other vents of the room may be blocked.A Clean the air intake of any dust or grease buildup.3 The air inside the room may be contaminated due to long use of a fireplace or spaceheater.A Open a window or vent to keep the air inside the room fresh.4 Heavy ventilation by other equipment or appliances causing the lack of air intake to thewater heater.A Lower the level of the ventilation of other equipment or appliances.5 Air shortage may be caused by too much steam in the unit.A Avoid direct contact from steam.6 Air intake filter is clogged.7.A Clean the air intake filter.http://globalimageserver.com/fetchDocument.aspx?id=14564cf7-cd7b-4814-9e1f-4fea34c7b30cRead Page 33 For Error Detail.That's the best i could Offer. Let me know,if needed further assistance.Hope i helped you.Thanks for using ' Fixya ' and have a nice day!!
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Hi,
C8 is a Cycle. 13 is the Error Code. As per Rheem 13 is listed as Oxygen Depletion Sensor Problem. The unit needs some dis-assembly and cleaning (or replacing) the oxygen sensor.
Let me know,if needed further assistance.
Hope i helped you.
Thanks for using ' Fixya ' and have a nice day!!
Thanks for your response!!
The Error that i Explained that was Directly explained by Rheem in their Documentation. I Wish i had a Better Answer.
\Here are the possible causes:
1 Air intake of the unit and/or vent termination may be blocked.
A Remove any obstructions of the air intake or vent termination
2 Ventilator or other vents of the room may be blocked.
A Clean the air intake of any dust or grease buildup.
3 The air inside the room may be contaminated due to long use of a fireplace or spaceheater.
A Open a window or vent to keep the air inside the room fresh.
4 Heavy ventilation by other equipment or appliances causing the lack of air intake to the
water heater.
A Lower the level of the ventilation of other equipment or appliances.
5 Air shortage may be caused by too much steam in the unit.
A Avoid direct contact from steam.
6 Air intake filter is clogged.
7.A Clean the air intake filter.
http://globalimageserver.com/fetchDocume...
Read Page 33 For Error Detail.
That's the best i could Offer.
Let me know,if needed further assistance.
Hope i helped you.
Thanks
for using ' Fixya ' and have a nice day!!