You can find the remote control codes for different brands of devices from http://www.hifi-remote.com/ofa/codes-tv.shtml#tv
If none of the codes work then we have two other solutions:
1. Searching For Your Code
If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code. If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.
PRESS the button for the device you want to program, (TV, VCR, CABLE, etc.), then RELEASE.
PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
ENTER 9-9-1 (two blinks on the remote)
ALTERNATE slowly between the POWER key and the DEVICE (TV, VCR, CABLE, etc.) button until your device turns off. (On VCR, LD, and CD players use PLAY instead of POWER) Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
When your device turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your device.
2. Learn the buttons from the original
Line up your original remote and the head-to-head before completing the following steps.
PRESS and HOLD the SETUP button until the red LED flashes twice.
PRESS 9 - 7 - 5, the red LED will flash twice.
PRESS the DEVICE key where you wish to learn the function. The next 3 steps must be completed within 10 seconds.
PRESS the button that will receive the learned function, the LED will flash rapidly.
PRESS the button on the original remote to be learned.
Now you can repeat steps 3 through 5 to learn other functions onto other keys or press and hold SETUP until the Cinema's red light flashes twice to lock in your new feature. (If the red light does not blink twice, stop and repeat steps through 6). To test the new feature, press and release the device key in which the new feature was learned followed by the key on which the feature was learned
More help for programming your remote can be found here: http://www.hifi-remote.com/manuals/ofa-l.shtml?URC-7800#device
Hope that helps! Should you have any further questions, please feel free to post them here.
P.S. - If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! rating. I would be very grateful for your show of appreciation.
Answers & Comments
You can find the remote control codes for different brands of devices from
- PRESS the button for the device you want to program, (TV, VCR, CABLE, etc.), then RELEASE.
- PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
- ENTER 9-9-1 (two blinks on the remote)
- ALTERNATE slowly between the POWER key and the DEVICE (TV, VCR, CABLE, etc.) button until your device turns off. (On VCR, LD, and CD players use PLAY instead of POWER)
- When your device turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your device.
- PRESS and HOLD the SETUP button until the red LED flashes twice.
- PRESS 9 - 7 - 5, the red LED will flash twice.
- PRESS the DEVICE key where you wish to learn the function. The next 3 steps must be completed within 10 seconds.
- PRESS the button that will receive the learned function, the LED will flash rapidly.
- PRESS the button on the original remote to be learned.
http://www.hifi-remote.com/ofa/codes-tv.shtml#tv
If none of the codes work then we have two other solutions:
1. Searching For Your Code
If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.
Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
2. Learn the buttons from the original
Line up your original remote and the head-to-head before completing the following steps.
Now you can repeat steps 3 through 5 to learn other functions onto other keys or press and hold SETUP until the Cinema's red light flashes twice to lock in your new feature. (If the red light does not blink twice, stop and repeat steps through 6).
To test the new feature, press and release the device key in which the new feature was learned followed by the key on which the feature was learned
More help for programming your remote can be found here:
http://www.hifi-remote.com/manuals/ofa-l.shtml?URC-7800#device
Hope that helps! Should you have any further questions, please feel free to post them here.
P.S. - If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! rating. I would be very grateful for your show of appreciation.
Thank you for using FIXYA!
Cheers!
IrishDruid
MANUFACTURER’S CODES
Setup Codes for TVs
AOC 0030
Admiral 0093, 0463
Advent 0761, 0842
Aiko 0092
Akai 0702, 0030, 0672, 0812
Alfide 0672
America Action 0180
Anam 0180
Apex Digital 0748, 0765, 0767
Audiovox 0451, 0180, 0092, 0623
Baysonic 0180
Bell & Howell 0154
Bradford 0180
Broksonic 0236, 0463
CXC 0180
Candle 0030
Carnivale 0030
Carver 0054
Celebrity 0000
Celera 0765
Changhong 0765
Cineral 0451, 0092
Citizen 0060, 0030, 0092
Clarion 0180
Contec 0180
Craig 0180
Crosley 0054
Crown 0180, 0672
Crown Mustang 0672
Curtis Mathes 0047, 0054, 0154, 0451, 0093,
0060, 0702, 0030, 0145, 0166,
1147, 1347
Daewoo 0451, 1661, 0092, 0672, 0623
Denon 0145
Dumont 0017
Durabrand 0178, 0180
Electroband 0000
Emerson 0154, 0236, 0463, 0180, 0178,
0171, 0623
Envision 0030
Fisher 0154
Fujitsu 0683, 0809
Funai 0180, 0171
Futuretech 0180
GE 0047, 0051, 0451, 0178, 1147,
1347
Gateway 1755, 1756
Gibralter 0017, 0030
GoldStar 0030, 0178
Gradiente 0053
Grundig 0672
Grunpy 0180
Hallmark 0178
Harman/Kardon 0054
Harvard 0180
Havermy 0093
Hello Kitty 0451
Hitachi 0145, 1145
Infinity 0054
Inteq 0017
I need the code for a "one for all" brand of remote control to be able to use on a sony trinitron model no. kv-2780R
I need the code to program my t v with my universal one for all remote control