Have generator showing emergency stop code and will not start
Traced out emergency stop wires by manual and everything looked good. Tried to reset code. Original installer did not have 120 volts ran to the generator. After running 120 volts to generator tried resetting faults. Codes will not reset and generator will not start
Electrical Supplies - Kohler - 20resa 20kw Home Emergency Backup Generator
Answers & Comments
There are too emergency stop sensors on generators
one is over load
the other is low oil level in the sump (Low oil pressure)
That sensor is known to trigger and activate the emergency stop so check it out after you check the oil level in the sump