HDMI on Hannspree JM01-22 cuts in and out
Not sure if this is a monitor / cable or graphics problem.
Twin screens (Dell E117FP) @1280x1024 with DVI to VGA adaptor and Hannspree JM01-22 @1680x1050 with HDMI to HDMI lead. Both on an Nvidea GeForce 9500GS (1xDVI &1xHDMI outputs)
The JM01-22 cuts out to a blank screen for about 5 second and then comes back. Power light still on and a crackle from the speakers as it cuts out / back in. The VGA monitor not affected at all during this. If I connect the JM01-02 via VGA all is fine.
Sometimes it will run for hours without doing it and sometimes every minute or so. Checked / wiggled cable with no effect. No errors showing up in Vista monitoring.
Any help / advice appreciated
Thanks
Tony
Twin screens (Dell E117FP) @1280x1024 with DVI to VGA adaptor and Hannspree JM01-22 @1680x1050 with HDMI to HDMI lead. Both on an Nvidea GeForce 9500GS (1xDVI &1xHDMI outputs)
The JM01-22 cuts out to a blank screen for about 5 second and then comes back. Power light still on and a crackle from the speakers as it cuts out / back in. The VGA monitor not affected at all during this. If I connect the JM01-02 via VGA all is fine.
Sometimes it will run for hours without doing it and sometimes every minute or so. Checked / wiggled cable with no effect. No errors showing up in Vista monitoring.
Any help / advice appreciated
Thanks
Tony
Computers & Internet - Hannspree - 22" widescreen LCD Flat Panel HD Monitor