headphone set up for use with a laptop or desktop computer. After calling the company to order the cable I was told this is a dynamic mic and would not work with a standard electrical mic imput... any ideas on how to terminate the cable for use with a computer (can't be usb)?
Radio Communications - Sennheiser
Answers & Comments
You have to wire the plug to eliminate the voltage sent by the sound card. I can't remember if it's the tip or the sleeve, so you'll have to verify with a volt meter. Use a 3 position plug to solder to the mic wires, just don't connect the wires of the mic to the one that has voltage on it