OPERATION (FIGURE 2) A. Main On/Off Switch The switch has two ON positions marked with and "Manual". The "Manual" position is for manual operation. In this position the built-in remote control is by-passed. The position is for operating the unit with the provided remote control. When in position the unit is operated with the ON and OFF buttons of the remote control. When the switch is in the center position the unit is off. B. Heater Switch The HEAT ON/OFF SWITCH supplies power to the heater fan and the heater element. When the switch is in the ON position the heater operates if the thermostat calls for heat. C. Heater Thermostat Control To adjust the temperature to your individual requirements, turn the thermostat control clockwise all the way to turn on the heater. When the room reaches the desired temperature, turn the thermostat knob counter clockwise until you hear a click. Leave in this position to maintain the room temperature at this setting. For additional heat, turn clockwise until you hear the click again and the heater will turn on. NOTE When the heater is switched ON, the heater fan will operate. The heater element may or may not be on, depending on the thermostat control setting (SEE "HEATER THERMOSTAT CONTROL"). RESETTING THE TEMPERATURE CUTOFF SWITCH Should the heater overheat, an automatic cut out will turn the heater off and it will not come back on without being reset. It can be reset by switching the MAIN ON/OFF SWITCH to OFF and waiting 5 minutes before switching the unit back on. CAUTION If you need to continuously reset the heater, unplug the unit and call Customer Service at 1-888-346-7539.
OPERATION (FIGURE 2)
A. Main On/Off Switch
The switch has two ON positions marked with and "Manual".
The "Manual" position is for manual operation. In this position the built-in remote control is by-passed.
The position is for operating the unit with the provided remote control. When in position the unit
is operated with the ON and OFF buttons of the remote control.
When the switch is in the center position the unit is off.
B. Heater Switch
The HEAT ON/OFF SWITCH supplies power to the heater fan and the heater element. When the
switch is in the ON position the heater operates if the thermostat calls for heat.
C. Heater Thermostat Control
To adjust the temperature to your individual requirements, turn the thermostat control clockwise all the
way to turn on the heater. When the room reaches the desired temperature, turn the thermostat knob
counter clockwise until you hear a click. Leave in this position to maintain the room temperature at
this setting. For additional heat, turn clockwise until you hear the click again and the heater will turn
on.
NOTE
When the heater is switched ON, the heater fan will operate. The heater element may or may not be
on, depending on the thermostat control setting (SEE "HEATER THERMOSTAT CONTROL").
RESETTING THE TEMPERATURE CUTOFF SWITCH
Should the heater overheat, an automatic cut out will turn the heater off and it will not come back on
without being reset. It can be reset by switching the MAIN ON/OFF SWITCH to OFF and waiting 5
minutes before switching the unit back on.
CAUTION If you need to continuously reset the heater, unplug the unit and call Customer Service at 1-888-346-7539.
Thanks for the rating and hope the product works after waiting. Thanks for the rating and hope the product works after waiting.
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
OPERATION (FIGURE 2)
A. Main On/Off Switch
The switch has two ON positions marked with and "Manual".
The "Manual" position is for manual operation. In this position the built-in remote control is by-passed.
The position is for operating the unit with the provided remote control. When in position the unit
is operated with the ON and OFF buttons of the remote control.
When the switch is in the center position the unit is off.
B. Heater Switch
The HEAT ON/OFF SWITCH supplies power to the heater fan and the heater element. When the
switch is in the ON position the heater operates if the thermostat calls for heat.
C. Heater Thermostat Control
To adjust the temperature to your individual requirements, turn the thermostat control clockwise all the
way to turn on the heater. When the room reaches the desired temperature, turn the thermostat knob
counter clockwise until you hear a click. Leave in this position to maintain the room temperature at
this setting. For additional heat, turn clockwise until you hear the click again and the heater will turn
on.
NOTE
When the heater is switched ON, the heater fan will operate. The heater element may or may not be
on, depending on the thermostat control setting (SEE "HEATER THERMOSTAT CONTROL").
RESETTING THE TEMPERATURE CUTOFF SWITCH
Should the heater overheat, an automatic cut out will turn the heater off and it will not come back on
without being reset. It can be reset by switching the MAIN ON/OFF SWITCH to OFF and waiting 5
minutes before switching the unit back on.
CAUTION
If you need to continuously reset the heater, unplug the unit and call Customer Service at 1-888-346-7539.
Thanks for the rating and hope the product works after waiting.