Hello Am having great difficulty reassembling our bugaboo after fixing white buttons. Am aligning lower leg with the ramp inside button. When I screw it all up again the lower leg and the outside of the button move together when lower leg is pushed. But the button wont pop out (or move at all), and I cant get the seat unit back onto the pram. Pls can you tell me what m doing wrong? Many thanks!
With the seat unit face down push down inside the lower leg unit with a screw driver, The white button should pop out. If it does not either the button is stuck or the locking splines on the outer sides of the button unit are not sliding freely into the spines of the outer ring. When you push down with the screwdriver your force only pushes the back of the button unit. It is the inner spring that has to move the white button and the locking splines so any burrs or roughness can stop its movement. www1.fixya.com/support/r7805137-fix_bugaboo_white_seat_buttons
Answers & Comments
With the seat unit face down push down inside the lower leg unit with a screw driver, The white button should pop out. If it does not either the button is stuck or the locking splines on the outer sides of the button unit are not sliding freely into the spines of the outer ring. When you push down with the screwdriver your force only pushes the back of the button unit. It is the inner spring that has to move the white button and the locking splines so any burrs or roughness can stop its movement. www1.fixya.com/support/r7805137-fix_bugaboo_white_seat_buttons
Thanks very much Stephen