well The software is on the camera, all you have to do is connect it to your network and let it get an IP address, after it shows an address on the side window, use internet explorer to go to that address ( 192.168.1.XXX) or whatever the mask is for your network, make sure internet explorer is set to allow activex controls downloading, the browser will download the control and ask for password and user name, the default is "password" and "admin" good luck thanks! mannu_rakeshwell The software is on the camera, all you have to do is connect it to your network and let it get an IP address, after it shows an address on the side window, use internet explorer to go to that address ( 192.168.1.XXX) or whatever the mask is for your network, make sure internet explorer is set to allow activex controls downloading, the browser will download the control and ask for password and user name, the default is "password" and "admin" good luck thanks! mannu_rakesh
well it should automatically configure the ip.try to change it and see if it works.well it should automatically configure the ip.try to change it and see if it works.
Answers & Comments
Hi,
download it from below link:- http://www.soft32.com/Download/Free/Veo_Web_Camera/4-175509-1.html
Thanks! mannu_rakesh
well The software is on the camera, all you have to do is connect it to your network and let it get an IP address, after it shows an address on the side window, use internet explorer to go to that address ( 192.168.1.XXX) or whatever the mask is for your network, make sure internet explorer is set to allow activex controls downloading, the browser will download the control and ask for password and user name, the default is "password" and "admin" good luck
thanks!
mannu_rakesh
well it should automatically configure the ip.try to change it and see if it works.