Ok so the TA code means that the all maintenance counter has reached its limit To clear this you need to clear this easy you want # , * , c , * To enter service mode Type in code 24 press start Then you want sub code04 Then you can select what you want to clear so the maintenance count all Execute this yes then press the CA key the machine will restart and away you go I also do advise that you service representative comes along at some point to check the machine it could need parts because if you stretch the life of parts your machine could become unreliable... But that is up to you
Answers & Comments
Ok so the TA code means that the all maintenance counter has reached its limit
To clear this you need to clear this easy you want
# , * , c , *
To enter service mode
Type in code 24 press start
Then you want sub code 04
Then you can select what you want to clear so the maintenance count all
Execute this yes then press the CA key the machine will restart and away you go
I also do advise that you service representative comes along at some point to check the machine it could need parts because if you stretch the life of parts your machine could become unreliable... But that is up to you