HELP ME WITH MY PALM CENTRO
MY PHONE WONT TURN ON AT FIRST IT KEPT TRYING TO HOTSYNC AND I DIDNT EVEN TELL IT SO I TOOK OUT THE BATTERY AND AND THE SIM CARD AND THEN IT WOULDNT TURN BACK ON.
Computers & Internet - Palm - Treo - Treo 500 Centro
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
I am having the same problem.
Tom(Fri Sep 19 2008 07:42:34 GMT-0300 (Atlantic Daylight Time))>Disconnect your smartphone from its AC charger and USB sync cable. The hard reset will not work if either of these is connected.
Remove the battery cover, take out the battery, and put it back in.
When the Palm logo appears, press and hold Power/End until the black status bar at the bottom of the screen fills and disappears.
The screen will go blank briefly, then you'll see an "Erase all style="display:none;">Tom(Fri Sep 19 2008 07:42:34 GMT-0300 (Atlantic Daylight Time))>Disconnect your smartphone from its AC charger and USB sync cable. The hard reset will not work if either of these is connected.
Remove the battery cover, take out the battery, and put it back in.
When the Palm logo appears, press and hold Power/End until the black status bar at the bottom of the screen fills and disappears.
The screen will go blank briefly, then you'll see an "Erase all data?" prompt.
Release Power/End .
Press Up to confirm the hard reset.
When the language selection screen appears, select the same language you selected for your desktop software.
Then you'll be prompted to tap targets and set up your device. When these steps are done, your device is ready for use.
Let me know if you need any further clarification in the steps listed above.
the hotsync steel comes out how do i get riid of it?
That's exactly the same problem i'm having! i picked up my palm centro phone to use it and noticed it was trying to hotsync. i haven't yet used the synch feature. i tried to cancel it but it wouldn't exit. i took out the battery and now while it initally displays the palm screen (with orange circle) when the battery is inserted, it then goes blank and the key pad and all other controls flash on and off.