Hi, does anyone know how to connect an LED to replace the original meter lamp on a Galaxy DX 959?, or please refer me to a site where to find this information. Thank you so much. Osvaldo
Radio Communications - Galaxy Radios - DX-959 40-Channels Base CB Radio
Answers & Comments
LED are diodes that operate around 2volts DC. A resistor must be soldered in series with anode or cathod side of diode if connecting to 12 volts DC. Anode to ground....if unsure start with 10k resistor and check voltage and work your way down to around 1.8 volts is ideal