Hi -- For my White Wing Steam Cleaner: After I plug in the unit, and wait over 10 minutes, the Pressure gauge shows that the pressure at 2 (maybe 2.5, I can't recall as I'm typing today) -- not close to the instruction-manual guide "the pressure gauge should read around 3.5 to 4.5". Any suggestions experts? It is the first time I am using the machine, and I am out of warranty (long story) :( Thanks in advance for any help. Andrea
Re: Low pressure on WhiteWing steam cleaner 1. Make sure the safety switch for the hose handle on the right side of the hose handle is turned to the closed position. To do that, push it away form the hose. 2. Make sure the steam release button (next to the on/off button on the control panel on the steamer) is in the Off position. 3. Make sure the safety cap is tightened. 4. Make sure you have enough water in the tank (at least half a bottle of water) I hope this helps.
Answers & Comments
Re: Low pressure on WhiteWing steam cleaner
1. Make sure the safety switch for the hose handle on the right side of the hose handle is turned to the closed position. To do that, push it away form the hose.
2. Make sure the steam release button (next to the on/off button on the control panel on the steamer) is in the Off position.
3. Make sure the safety cap is tightened.
4. Make sure you have enough water in the tank (at least half a bottle of water)
I hope this helps.