Hi guys my telescope will only move up and down in the asention. it will not move left or right and motor fault scrolls across the controler. its a lxd55. can you advise me please
Are you using a separate 12 volt power pack? which you should use.
Change the batteries to fresh ones. Turn the scope on and do a Calibrate Motors.
This adjusts the motors for the electric voltage being used. Your scope will go crazy when the batteries drop to about 60% of charge. That's why a separate 12 amp hour 12 volt power pack is preferred.
Answers & Comments
Are you using a separate 12 volt power pack? which you should use.
Change the batteries to fresh ones. Turn the scope on and do a Calibrate Motors.
This adjusts the motors for the electric voltage being used. Your scope will go crazy when the batteries drop to about 60% of charge. That's why a separate 12 amp hour 12 volt power pack is preferred.