Hi i have a cannon ip90 printer that makes weird noises and then prompts : "Error, Will Not Print". how can i fix this problem and what is the possible cause of this problem ? please help !! thanks in advance
1.Uninstall / reinstall the printer driver . 2.You should disconnect and reconnect the USB cable at both ends to ensure there is a secure connection on the device side as well as the computer side. 3.Try this reset procedure : First power off the printer. Next, while holding STOP/RESET button, power on the printer. While holding POWER button, release STOP/RESET button. Then push STOP/RESET button twice. Wait about 20-30 second until the LED shows "0?. Then push STOP/RESET button four times.Finally push POWER button twice. Last step is to turn off the printer by pressing the POWER button one last time.
Answers & Comments
1.Uninstall / reinstall the printer driver .
2.You should disconnect and reconnect the USB cable at both ends to ensure there is a secure connection on the device side as well as the computer side.
3.Try this reset procedure :
First power off the printer. Next, while holding STOP/RESET button, power on the printer.
While holding POWER button, release STOP/RESET button. Then push STOP/RESET button twice. Wait about 20-30 second until the LED shows "0?. Then push STOP/RESET button four times.Finally push POWER button twice. Last step is to turn off the printer by pressing the POWER button one last time.