Hi I have a MS7188D Matsonic motherboard, the problem is ....NO VIDEO....the last time somebody sugest me to short it out something inside the motherboard but I don't remember which one was...could you help me to solve this problem ???? Thanks
Computers & Internet - Matsonic - MS9158E+ Motherboard
If your going to use the on-board video for this motherboard, make sure you check on the contact point of every peripherals like the memory chip. It should be cleaned using a standard eraser (use in erasing pencil marks), Before inserting it to the memory slots.
Do a repetitive insertion between the memory and the slots severals times until you boot up the pc. I would suggest you disconnect the Hard drive from its power source and from the motherboard while doing this procedure.
Answers & Comments
If your going to use the on-board video for this motherboard, make sure you check on the contact point of every peripherals like the memory chip. It should be cleaned using a standard eraser (use in erasing pencil marks), Before inserting it to the memory slots.
Do a repetitive insertion between the memory and the slots severals times until you boot up the pc. I would suggest you disconnect the Hard drive from its power source and from the motherboard while doing this procedure.