Here are the instruction to retrieve a previously saved project on the Zoom MRS-8. 1. From the main screen press the [SYSTEM/UTILITY] key in the display section. 2. Verify that "SYSTEM PROJECT" is shown and the press the [ENETR] key. 3. Use the LEFT and RIGHT cursor keys to select the operation you want (look for PROJECT SELECT). 4. Press the [ENTER] key when it says project select on the display. 5. You'll see the name of a project in the following format "PRJ002". 6. Turn the dial to select the desired project. 7. Press the [ENTER] key to load the project. 8. When loading completes the unit will return to the main screen. Cheers, bd.
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Here are the instruction to retrieve a previously saved project on the Zoom MRS-8.
1. From the main screen press the [SYSTEM/UTILITY] key in the display section.
2. Verify that "SYSTEM PROJECT" is shown and the press the [ENETR] key.
3. Use the LEFT and RIGHT cursor keys to select the operation you want (look for PROJECT SELECT).
4. Press the [ENTER] key when it says project select on the display.
5. You'll see the name of a project in the following format "PRJ002".
6. Turn the dial to select the desired project.
7. Press the [ENTER] key to load the project.
8. When loading completes the unit will return to the main screen.
Cheers,
bd.