Hi I have this cb installed in my jeep, did it myself. All is hooked up properly and xxchecked. It turns on, and all the lights work, meter and channel lights are on. Squelch isn't working and which told me off the bat something was wrong. it just sits there with no incoming reception. meter stays pegged to the far left. I installed it 2days ago and today was the first time I plugged in the mike, because I was afraid I would do some damage to the circuitry. When I key the mike the meter moves about half way on the scale. At this point I did a radio check and nothing. All n All I think the transmit and receive are not working. Antenna system is ok I checked with an ohm meter all is well 0 resistance. I think I need to send the radio back I recieved it on Dec 27 from Amazon.com thanks frankie
Hello Frankie. Your diagnosis is correct. Pull it out and return it while it is still new. Do this asap so amazon doesn't give you a difficult time. Joe
Answers & Comments
Hello Frankie.
Your diagnosis is correct. Pull it out and return it while it is still new. Do this asap so amazon doesn't give you a difficult time. Joe
Thanks for choosing Fixya!