Hi, I need to set the IP configuration on my MITEL 5212 IP Phone manually, but I do not know how to do it. I guess that there is a sequence of key to press, any help will be appreciated
Press and hold the up arrow key while booting the phone. Configure telephone - YES, Network Parameters - yes, then NO until you see Change. Set the appropriate information, IP address, default gateway, ICP IP address, TFTP server address, etc.
You should be warned that this gains nothing except making another device on the network that requires deliberate management.
I don't advise this, but press the up arrow while booting, press yes to configure phone. Press yes when you see network configuration. press no until you see the option to change. enter the proper information.
Keep in mind that you don't benefit from this. If you set the phone to an IP address that's already in use, you could crash the network.
- Mark I don't advise this, but press the up arrow while booting, press yes to configure phone. Press yes when you see network configuration. press no until you see the option to change. enter the proper information.
Keep in mind that you don't benefit from this. If you set the phone to an IP address that's already in use, you could crash the network.
Answers & Comments
Press and hold the up arrow key while booting the phone. Configure telephone - YES, Network Parameters - yes, then NO until you see Change. Set the appropriate information, IP address, default gateway, ICP IP address, TFTP server address, etc.
You should be warned that this gains nothing except making another device on the network that requires deliberate management.
- Mark
I don't advise this, but press the up arrow while booting, press yes to configure phone. Press yes when you see network configuration. press no until you see the option to change. enter the proper information.
Keep in mind that you don't benefit from this. If you set the phone to an IP address that's already in use, you could crash the network.
- Mark