Hi ihave brought helicopter ftw 730 but the remote control was not its own .the helicopter ftw 730 remote control frequency is 40 mhz but the one i have is 27 mhz so how can i make as 40 mhz remote control
Toys - RC - Remote Control Rc Mini Helicopter
Answers & Comments
Well i could say you need a new chip but remotes only support there range so ig you have a 30 mhz radio it will only use 40-49 chips.So the best way would be to buy a new reciever on your helicopter.
Unfortunately you can't. You will need to change the receiver or the transmitter so they are both the same frequency range eg 40mhz or 27mhz. Then you will need to check the crystal is the same frequency for the Transmitter and receiver eg 40.25mhz. NB. you can't put a 27mhz crystal into a 40mhz set or vise versa it won't work.