The thermocouple from the burner flame port to the gas valve is bad. Shut your gas supply off, unscrew the small fitting with the small copper tubing coming out of the gas valve. Follow that tubing up to the burner and disassemble the pilot light end from the burner. Home Depot has a good selection normally or you may want to go to a furnace supply. It shouldn't be more than 10 or 15 dollars for the new one. Reinstall, turn the gas back on and make any adjustments to flame location at the burner.
Im going to call it the filimint its the little thing that is next to the ingintor was not in the ploit heating it up. when i was cleaning it with a brush i must have moved it away from the flame, it has to be in the flame. about 7 hours in two days, i finally got it. duhhh
Answers & Comments
The thermocouple from the burner flame port to the gas valve is bad. Shut your gas supply off, unscrew the small fitting with the small copper tubing coming out of the gas valve. Follow that tubing up to the burner and disassemble the pilot light end from the burner. Home Depot has a good selection normally or you may want to go to a furnace supply. It shouldn't be more than 10 or 15 dollars for the new one. Reinstall, turn the gas back on and make any adjustments to flame location at the burner.
Im going to call it the filimint its the little thing that is next to the ingintor was not in the ploit heating it up. when i was cleaning it with a brush i must have moved it away from the flame, it has to be in the flame. about 7 hours in two days, i finally got it. duhhh