Hi,I am Udo from Germany. Please execuse my bad English because I have learn it at school 25 ago. My problem is: I have a Ultimate Sound T3 Series 4070 Car Audio Amplifier with 4 channel and I want play this Amp with two Subwoofer. I want to know how I must bridge the Amp for most power ? Thanks,Udo
Car Audio & Video - Ultimate Sound - T3 Series 4320 Car Audio Amplifier
Answers & Comments
Run a wire from the negative side of one speaker to the positive side of the other speaker. Then plug the remaining two wires into the amp. The positive wire coming from the first speaker goes to the positive on the amp on the first channel. Then run the second wire coming from the negative side of the second speaker to the negative side of the second channel on the amp. There for giving you the max power of your amp to your speakers. Hope this was helpful!!!
Hi smitty.
Nice to meet you here.
Thank´s a lot for your answere,that what you have writen is right,I know this from the german Amplifire.
The ultimate power output is not the same.
Normaly the output will be - , -, and so on.
The Ultimate output is so :
speaker output:
- - - -
look here:
www.ultimate-sound.com/car/manuals/T3ManualAmp.pdf
The problem is my english,I cant tell you what I want,sorry,but I find it very nice that you help me.