I have found a model F800 MAF and MWF. Could not find MAH.



First, the flush switch looks like a SPDT switch. The violet wire attaches to the single pole side of that switch. The other end attaches to terminal 3 on the flush timer.



The other 2 poles on the switch has a red and orange wire. The orange wire goes from the switch to the number 1 terminal of the flush timer and then "Piggy Backs" from there to the gear motor relay terminal 4.



The red wire goes from the switch to the float switch and also branches off to the water control relay terminal 5.



The flush switch is not numbered in the diagram. You can try to figure out the poles on the switch with a meter.



Again, good luck I have found a model F800 MAF and MWF. Could not find MAH.

First, the flush switch looks like a SPDT switch. The violet wire attaches to the single pole side of that switch. The other end attaches to terminal 3 on the flush timer.

The other 2 poles on the switch has a red and orange wire. The orange wire goes from the switch to the number 1 terminal of the flush timer and then "Piggy Backs" from there to the gear motor relay terminal 4.

The red wire goes from the switch to the float switch and also branches off to the water control relay terminal 5.

The flush switch is not numbered in the diagram. You can try to figure out the poles on the switch with a meter.

Again, good luck