Try lining up the splines on the axle with the tranny, then tap the end of the axle (goes thru the wheel hub) with a brass hammer. Should be tight, but dont hit it hard enough to damage the axle shaft. If it still wont go in, look at the splines on the transaxle, they may be damaged.
Answers & Comments
Try lining up the splines on the axle with the tranny, then tap the end of the axle (goes thru the wheel hub) with a brass hammer. Should be tight, but dont hit it hard enough to damage the axle shaft. If it still wont go in, look at the splines on the transaxle, they may be damaged.