To bleed a John Deere 2240, find the bleeder port on the injector port. Crack open the bleeder port while you're pumping the handle on the fuel pump or cranking the engine. Keep pumping until you get a steady stream with no air. Be sure to keep pumping while you're closing the bleeder port screw. If you can't get it to run right after bleeding the pump, you may have to bleed the injectors. Just crack the nut loose on the injector and start pumping. Keep on bleeding until all the air is out.
Answers & Comments
To bleed a John Deere 2240, find the bleeder port on the injector port. Crack open the bleeder port while you're pumping the handle on the fuel pump or cranking the engine. Keep pumping until you get a steady stream with no air. Be sure to keep pumping while you're closing the bleeder port screw. If you can't get it to run right after bleeding the pump, you may have to bleed the injectors. Just crack the nut loose on the injector and start pumping. Keep on bleeding until all the air is out.
----------------------------------------------------------------------------------------------
FGTech Galletto 2-Master EOBD2