1) Disconnect the negative battery cable for safety. 2)It is located on the right side of the throttle body. May have to take off throttle body cover to see it. 3) Locate the throttle position sensor. The sensor is attached to the rear of the throttle body. 4) Use the torx screwdriver or socket to loosen the bolts on the throttle position sensor, then remove them by hand. 5) Pull the throttle position sensor off; you may have to wiggle it back and forth to remove it. 6) Place the new throttle position sensor in its place. Tighten the torx screws and reconnect the electrical connection and the negative battery cable. Thanks. keep updated for any more query.you can rate this solution and show your appreciation.
Answers & Comments
1) Disconnect the negative battery cable for safety.
2)It is located on the right side of the throttle body. May have to take off throttle body cover to see it.
3) Locate the throttle position sensor. The sensor is attached to the rear of the throttle body.
4) Use the torx screwdriver or socket to loosen the bolts on the throttle position sensor, then remove them by hand.
5) Pull the throttle position sensor off; you may have to wiggle it back and forth to remove it.
6) Place the new throttle position sensor in its place. Tighten the torx screws and reconnect the electrical connection and the negative battery cable.
Thanks. keep updated for any more query.you can rate this solution and show your appreciation.