The printhead is a 300 dpi thermal. If you raise the head and can see the glass face, there are 2 rows of heating elements that are used in printing. As in all thermal heads, do not use any sharp objects to scrape on the head. I usually use a non volitile citrus cleaner or iso alchohol. The plate beneath the head should also be checked for wear and cleaned to provide positve drive for the stock.
Answers & Comments
The printhead is a 300 dpi thermal. If you raise the head and can see the glass face, there are 2 rows of heating elements that are used in printing.
As in all thermal heads, do not use any sharp objects to scrape on the head. I usually use a non volitile citrus cleaner or iso alchohol.
The plate beneath the head should also be checked for wear and cleaned to provide positve drive for the stock.
Is it possible to change the print head, if so where to buy?