How do I connect my behringer mixer desk to
How do I connect my behringer mixer desk UB1622FX-Pro to my skytronic 240 amplifier and speakers as I can only get one speaker to work?
Music - Behringer - DJx700 5-Channel Pro DJ Mixer with Digital Effects & Bpm...
Answers & Comments
The first thing to do is to swap teh L & R INPUTS to the amplifier. Did the speaker that works change?
If som the problem is with the setting of the mixer deck. If it did not change, then the problem is with your speaker wiring of the dead speaker, the speaker itself, or that side of the amp.
If the working speaker did swap, that means problem is with the mixer. The question then becomes how are you connecting to the mixer. You should be using TRS 1/4 inch connectors or preferably XLR from the MAIN outputs. These are balanced outputs connections.
If the inputs are from one of the mono inputs, the PAN control for that channel will control how much goes to each speaker... If at center, both will get same signal.
There are so many possibilities that I can't evaluate them until you try the test to find if it is problem of the amp or the mixer that I have given you to try.